Archive for January 2012
Simple Yet Useful Hardwood Floor Care
January 31, 2012 | 
Author 
Keeping good hardwood floor care isn’t always easy, however with these tips and advice, you’ll have the ability to remove polish, stains, and the hardwood floor will look new again.
Buffing, Polishing, Cleaning
Get a buffer from nearby grocery shop. First, make use of the buffer to get rid of grease and dirt. Next you will have to make use of a cleaner specifically for floor to wash your floor, or mix an mix of water and vinegar for surface sealed flooring. Without having a surface sealed floor, you can try to wipe your finger onto it and when there is a smudge, then it is most likely not surface-sealed, you will have to go to your local shop and get a particular cleaner. A PH neutral cleaner can clean your floor the most, but mostly can wear it down after time to time. After you have washed your floor, use your customized polish and then make it smooth using the buffer.
Stain Removal
Common surface stains should develop easily, however when a liquid is permitted to saturate for any extended time period, it will seep into the wood and also be hard to remove. When it comes to surface stains, try using water first. In case that fails, make use of a fine nylon material rubbing pad and then try to clean the stain again. You can try dabbing just a little lacquer thinner over the stain. Or, you may also use a stain removal items from your local store. When the stain is simply too deep to clean, you can try to sand the stained area to get rid of the stain, then you can refinish it.
Posted in DIY, Flooring, Home Tips | 
Tags: Buffer, Hardwood Cleaner, Hardwood Floor Care, Surface Sealed Floor, vinegar | 
No Comments »
Tips and Methods For Hardwood Floor Repair: No Worries
Hardwood is really a stunning flooring surface, however when it is broken it may need hardwood floor repair. Here are few tips for you.
Scratches. When the scratch is just slightly permeated the top of your hardwood flooring surface, you are able to repair the scratches easily having a light use of a clean finish for example “Jasco” or “Future” with a cotton wool ball or small brush. Apply the same finish with what originally was put on the hardwood if you’re able to. Generally, you does not need to restain those scratches, because the initial stain usually permeates to around 1 / 8 inch.
Dents. Should you drop hammer or perhaps a huge skillet on the hardwood floor, and wound up having a fairly serious ding inside your hardwood, dip a heavy cloth or sponge in water till it is almost wet and put it over broken area. Put a bit of plastic within the wet material and just let it, for more than 8 hrs. Frequently, the wood will go back into position, then only give you a scratch to deal with.
Ding. A far more serious damage towards your hardwood can lead to the exposure of original raw wood, possibly even some splinters. If this happens, you’ve two options:
First. Take away the broken plank and change it to a spare plank. This involves some skill and we recommend to hire some professional installer to do it.
Second. Load the ding with dedicated wood putty, whether colored to fit your hardwood floor, or maybe stainable. You need to sand it down to some flat working surface soon after it’s dried. After it has been dried, carried out with a clear coat.
Posted in DIY, Flooring, Home Improvement, Home Tips | Tags: Damaged Hardwood, Future, Hardwood Dents, Hardwood Ding, Hardwood Floor Repair, Hardwood Plank, Hardwood Scratches, Hardwood Splinters, Jasco | No Comments »